Free shipping on orders over
Free shipping over

Shopping Cart

StoneTech Bulletproof Sealer

$185.33 $92.67

StoneTech Bulletproof Sealer

Use on natural stone such as marble, granite, limestone, slate, and travertine.

Features

  • Maximum penetrating microbond protection
  • Heavy-duty protection against most stains
  • It makes cleaning stones easier
  • Preserves natural look
  • Water-based formula
  • Interior and exterior

Directions for Use

  • Allow new grout installations to cure for a minimum of 72 hours before application
  • Make sure the surface is clean and free of waxes and coatings
  • Sealer may be applied to damp surfaces 1 hour after standing water is removed
  • Surface temperature should be between 50F and 80F
  • Ensure that the area is well-ventilated during application and until the surface is dry
  • Mask any surfaces not intended to be treated
  • Apply sealer evenly and liberally using a paint pad, roller, brush or low-pressure sprayer
  • Allow sealer to penetrate the surface for 1530 minutes
  • During this time, keep the surface wet with sealer, adding more sealer as needed
  • DO NOT ALLOW SEALER TO DRY ON THE SURFACE COMPLETELY
  • Remove excess sealer by wiping the surface thoroughly with clean, dry towels
  • Should a sealer residue appear, rewet the impacted section of the surface with sealer
  • Agitate the surface with a white nylon scrubbing pad to loosen residue and wipe dry with a clean, absorbent towel
  • A complete cure is achieved after 2472 hours
  • Foot traffic may begin in 68 hours. If needed sooner, cover the floor with red rosin paper to protect it until full cure is achieved
  • Clean tools used during application with water

Available Sizes and Coverage

  • Pint: up to 112 sq ft
  • Quart: up to 225 sq ft
  • Gallon: up to 900 sq ft for a single coat application
  • Expected Wear: up to 5 years on interior surfaces and up to 3 years on exterior surfaces
Add a Review

Your email address will not be published. Required fields are marked *

Related Products